Frequently Bought Together
- The Hydro-x Pro is designed to be a single room controller for reliability and ease-of-use. The Hydro-X Pro expands the capability of the original Hydro-X by allowing up to 50 sensors and up to 50 separate control modules to be connected to a single Hydro-X Pro. Multiple sub-zones can be created within the single grow space by linking a specific sensor, to a specific control function(s). The new 4-in-1 sensor comes with a LCD screen which provide the ease of onside monitoring.
- Water Detector 2（WD-2） The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
- The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements.
- The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand.
- The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems. Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.
HCS-2
| Specifications | |
|---|---|
| Width (in.) | 6.5 |
| Length (in.) | 10 |
| Height (in.) | 2.5 |
WD-2
| Specifications | |
|---|---|
| Dimensions | 6.42 x 3.62 x 3.5 inches |
| G.W. per pack | 15.2 ounce |
MBS-PAR
| Specifications | |
|---|---|
| Package Dimensions | 160mm(L) x 86mm(W) x 86mm(H) |
| Working Environment | Temperature 32-122°F, Humidity=90% |
MB-SD
| Specifications | |
|---|---|
| Package Dimensions | 160mm(L) x 86mm(W) x 86mm(H) |
| G.W. per pack | 0.37kgs |
MBS
| Specifications | |
|---|---|
| Package Dimensions | 275mm X 164mm X 62mm |
| Input Voltage | 0~11.5V |
- The Hydro-x Pro is designed to be a single room controller for reliability and ease-of-use. The Hydro-X Pro expands the capability of the original Hydro-X by allowing up to 50 sensors and up to 50 separate control modules to be connected to a single Hydro-X Pro. Multiple sub-zones can be created within the single grow space by linking a specific sensor, to a specific control function(s). The new 4-in-1 sensor comes with a LCD screen which provide the ease of onside monitoring.
- Water Detector 2（WD-2） The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.
- The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements.
- The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will receive a user-alert on their phone to alert them to the potential problem BEFORE the problem gets out of hand.
- The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for both Hydro-X Pro and Hydro-X Plus systems. Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.
HCS-2
| Specifications | |
|---|---|
| Width (in.) | 6.5 |
| Length (in.) | 10 |
| Height (in.) | 2.5 |
WD-2
| Specifications | |
|---|---|
| Dimensions | 6.42 x 3.62 x 3.5 inches |
| G.W. per pack | 15.2 ounce |
MBS-PAR
| Specifications | |
|---|---|
| Package Dimensions | 160mm(L) x 86mm(W) x 86mm(H) |
| Working Environment | Temperature 32-122°F, Humidity=90% |
MB-SD
| Specifications | |
|---|---|
| Package Dimensions | 160mm(L) x 86mm(W) x 86mm(H) |
| G.W. per pack | 0.37kgs |
MBS
| Specifications | |
|---|---|
| Package Dimensions | 275mm X 164mm X 62mm |
| Input Voltage | 0~11.5V |
